Product Categories
(Total 12 Products for Insulated Bullet Connector)
Insulated Bullet Connectors Cable Lugs
The application of copper terminal is very extensive, in the industry is mainly to act as a connector, some electrical connection. Copper terminals can ensure the reliability and convenience of electrical circuit connection. The copper terminals is at the end of the wire and then use the special crimping pliers to...
Insulated Bullet Connectors Brass Red/Blue/Yellow
In order to ensure the reliability of Copper Terminals quality and good use effect, it is necessary to carry out a series of effective preventive reliability tests according to the technical requirements of the standard. First of all, attention should be paid to prevent poor contact of wiring terminals. So how do you...
Longyi Insulated Bullet Connector Terminals
The most pivotal is the processing of wiring Copper Terminals thread, thread processing is not good, the torque is not up to standard then lost the role of connecting wire. The thread refers to the thread of the wiring cold-pressed Terminal on the Insulated Terminalst, so as to connect with the field joint. For...
Insulated Socket Connectors F5.5B
The first is fumigation: as the name implies, fumigation is used to change the color of the product, which can also be called dyeing method. The specific method is to attach the color masterbatch to the surface of the product by heating it in the fumigation process after the product is formed. The advantages of this...
Insulated Bullet Connectors F5.5A Cuble Lugs
Copper Terminals blocks are to a large extent also used to achieve electrical connections on a kind of accessory products, used in industry to be divided into the category of connectors. With the increasing degree of industrial automation, and its industrial control requirements are more and more strict and accurate,...
Insulated Socket Connectors F1.25B
When it comes to the Copper Lugs among the insurance terminal, simply speaking, in fact, it refers to the use of insulating materials with modified nylon (PA66), in view of this, we will find that it is actually a better electrical and mechanical properties. In terms of the screw itself is also made from high strength...
Insulated Bullet Connectors F2A
Cold pressed Copper Terminals detection method: according to his cross section of the wire to see whether and Cold pressed copper terminal, we need to strip the insulation of the wire, make it consistent length Should be required. All the wires in the wire he put in the cold pressed Copper Terminals, The requirement...
Insulated Bullet Connectors F1.25A
Ring Type Connecting Terminals This section describes the certification of copper tube terminals Insulated bullet/socket terminals 1, cable lugs are suitable for the connection of copper conductors in power cable with electronic equipment
2, Material: They are made of higher 99.99 % pure copper tube T2.
3, Working...
Insulated Female Connectors YF250
Next, what we xiaobian prepare for you today is the piercing connection method and specific information about wiring Copper Terminals As follows: The piercing connection mode of terminal blocks was first invented by Americans and has high reliability. It was cheap and easy to use, and this new way of connecting was...
Copper Cold End Ring Connector Terminal
Ring insulated terminals
1, cable lugs are suitable for the connection of copper conductors (section 1.25-5.5mm2) in power cable with electronic equipment
2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC
4, Surface: Tin-plated
5, Insulated material: PVC, nylon
6, Wire...
Insulated Ring Terminal Connector, Terminals
Before wiring should be calibrated line, line end should be marked; The core should not be damaged when peeling the insulation layer; The cable and Copper Lugs connection should be uniform and firm, good conductivity; It is advisable to use a lug at the end of a multi-strand wire core, and the connection between the...
Type Copper Nose PVC Round Pre-Insulated Terminal Lug
Spade insulated terminals 1, cable lugs are suitable for the connection of copper conductors (section 1.25-8mm2) in power cable with electronic equipment
2, Material: They are made of higher 99.99 % pure copper tube T2.3, Working temperature -55oC-150oC
4, Surface: Tin-plated
5, Insulated material: PVC, nylon
6, Wire...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
